Mitsubishi Electric · Air source heat pump

Mitsubishi Electric Ecodan R290

PUZ-WZ50VAA · 5 kW size · single-phase

A single-phase R290 monobloc air-to-water heat pump from Mitsubishi Electric's Ecodan range, sold in the UK as the 5 kW size.

Outdoor unit only. Required controls and indoor parts are listed below.

Mitsubishi Electric Ecodan R290
Photo: Mitsubishi Electric / product listing.

Your comparison shortlist

Specifications

Checked .

What this listing is
Outdoor unit (monobloc) ↗
Size as marketed
Marketed as 5 kW ↗
Also needed indoors
Outdoor unit only. Needs an Ecodan FTC7 controller: either the standalone FTC7 (PAC-IF082B-E) with a separate cylinder, or an FTC7 packaged or pre-plumbed Ecodan cylinder. These are sold separately. ↗
Heat output at 7 °C outside, 35 °C flow (kW)
4 Outdoor air 7 °C, flow 35 °C (EN 14511); standard rating point ↗
Heat output at 7 °C outside, 55 °C flow (kW)
Not confirmed
Heat output at 2 °C outside, 35 °C flow (kW)
5 Outdoor air 2 °C, flow 35 °C (EN 14511); standard rating point ↗
Heat output at −7 °C outside, 55 °C flow (kW)
Not confirmed
Seasonal efficiency (SCOP), 35 °C flow
Not confirmed
Seasonal efficiency (SCOP), 55 °C flow
Not confirmed
COP at 7 °C outside, 35 °C flow
5.1 Outdoor air 7 °C, flow 35 °C (EN 14511), includes water pump input ↗
COP at 2 °C outside, 35 °C flow
3.15 Outdoor air 2 °C, flow 35 °C (EN 14511), includes water pump input ↗
Energy label, 35 °C flow
A+++ Space heating at 35 °C ↗
Energy label, 55 °C flow
A++ Space heating at 55 °C ↗
Refrigerant
R290 (propane) ↗
Sound power (dB(A))
56 Sound power (BS EN 12102), heating at outdoor air 7 °C, flow 55 °C ↗
Sound pressure (dB(A))
Not confirmed
Maximum flow temperature (°C)
75 Maximum water outlet temperature ↗
Lowest outdoor operating temperature (°C)
-25 Guaranteed operating range for heating, -25 to +24 °C outdoor ↗
Electricity supply
Single-phase 220–240 V, 50 Hz ↗
Dimensions, H × W × D
1,020 × 1,050 × 480 mm Height × width × depth ↗
Weight (kg)
89 ↗
Warranty
Up to 3, 5 or 7 years depending on the installer's Mitsubishi Electric status (standard, Accredited Ecodan installer or Business Solutions Partner). ↗

Prices and ordering

No recently checked price is available. Manufacturer’s current range.

How to compare heat pumps

Compare output and efficiency at the same outdoor and flow temperatures. Flow temperature is the temperature of the water sent to your radiators. A heat-loss survey determines the size you need. These listings cover outdoor units; controls, indoor components and usually a hot water cylinder complete the system.

Reviews from other sites

Summaries from independent publishers, installers and owners. Each link opens the original review.

  1. Installer’s assessment

    5 kW Ecodan R290 installation in Praa Sands

    GreenGenUK · checked

    Applies to
    5 kW Ecodan R290 installation; the full model code is unspecified. Range review.
    Review basis
    Installer case study covering heat-loss calculations, radiators and a cylinder upgrade. Running costs are estimates.
    Summary
    GreenGenUK replaced an LPG boiler with a 5 kW Ecodan R290 while retaining traditional column radiators. It calculated a 4.3 kW heat loss and fitted a new heat-pump cylinder.

    Strengths

    • The installer retained the existing column radiators in this home.
    • The case study explains the heat-loss assessment and cylinder choice.

    Drawbacks

    • A cylinder upgrade was part of this installation.
    • No measured annual efficiency or running-cost dataset is supplied.

    GreenGenUK supplied the installation and uses this case study to promote its services.

Find an installer

By postcode

Find local heat pump installers and ask whether they fit Mitsubishi Electric Ecodan R290. Your enquiry will include this model.

Sources and documents

Manufacturer documents and UK supplier information.

Compare with a similar heat pump

Browse all heat pumps